Petroliana Collectibles

ECO MODEL 90 SERIES
AIR METERS

"We are the worlds largest supplier of ECO parts"

MECHANICAL - REAR PARTS

PLEASE NOTE, WE HAVE A NEW EMAIL ADDRESS:

jhsim@petrocollect.com

ITEM #

PART #

PICTURE

DESCRIPTION

PRICE

 IMPORTANT, PLEASE READ THIS

UP UNTIL ABOUT A YEAR AGO, MANY OF THESE PARTS WERE BEING STILL MADE, BUT THAT IS NOT TRUE NOW. WE HAVE HAD TO ADD "CHECK ON AVAILABILITY" TO MANY OF OUR ITEMS.  PLEASE CHECK WITH US, WE WILL LET YOU KNOW WHAT WE HAVE.  jhsim@petrocollect.com

For those of you who want a working unit but do not wish to repair it yourself, we offer a complete repair service.  PLEASE CLICK HERE

    7207 FACE, CHROME & HOUSING STAINLESS STEEL SCREW KIT
Stainless Steel Screw Kit.  Why put your unit back together with the old bolts or even with bolts that will rust.  Here is a complete Stainless Steel Screw Kit for your trim.  Includes: 4-Screws to hold face on; 4-screws to hold chrome pieces on; 4-screws to hold front housing on; 4-screws to hold rear cover on; 2-screws to hold the hook on; and the screw for the reset handle.
6.00
    7401 MECHANICAL SCREW & BOLT KIT
If you are planning on rebuilding your mechanism, it would be wise to have new screws to put it back together.  You never know when one will break, and besides they look a lot better than the old rusted ones.  Most are Stainless Steel. 
Includes 2 new housing bolts & washers; 2 new SS Valve screws and washers; Bell screw & washer; 3 new SS strainer bolts;  14 new SS Diaphragm Housing screws; and 4 "E" Clips.  Note:  Be sure to use the valve screw washers, otherwise the screws will be too long and go through and scrape against the numbered wheels.
28.00
  1   7400 Stainless Steel Screw for Reset Handle or black knob..  Part of Stainless Steel Screw Kit. 1.00
  2   7402 NOS, ECO factory made Black Plastic Knob, interchangeable with original reset handle, comes with Stainless Steel screw. 15.00
  2   7404 Reproduction Chrome Reset Handle, comes with Stainless Steel Reset Screw. 37.00
  2   7406 We occasionally have a good used original reset handle.  Before ordering, please check on availability.  
  3   7407/7408 Original used fiber washer and spring.  This was dropped years ago as not necessary, but we do have some good used ones. 12.00
  5, 10, 11   7410 Adjusting screw & gear assembly, only sold complete.
Because these are no longer being made, we may have to send you an excellent used one

(PRESENTLY OUT OF STOCK, CHECK ON AVAILABILITY)

100.00
  9/12   7412 & 7413 NOS, ECO factory made Motor lever fulcrum pin and Lever pin.  Sold as a set of two.
 
30.00
10-11   No longer available individually Screw & lock washer
 
 
  12   7413   NOS, ECO factory made Lever fulcrum pin, 3" long 20.00
  13   30126 No longer used, but we have some used ones Washer 1.00
  17   7322 Body Assembly, used 150.00
    7245 2-bolts & 2-washers.  Holds mechanism to frame.  Part of mechanical Screw Kit 2.00
Pair
  21,24,25   7416 NOS, ECO factory made Inflator spring assembly, complete 100.00
  21  7416A   Spring only, no longer available but we have some good used ones 75.00
  24   7422 NOS, ECO factory made Inflator adjusting nut ring & pin assembly 75.00
  23   7424 NOS, ECO factory made Bearing Bushing 18.00
  27   7418 NOS, ECO factory made Motor Lever Spring - There are 2 spring that look like this one, this is the larger of the two 39.00
  28   7420 NOS, ECO factory made Shot Lengthener only.  Not as shown in illustration above.  Individual parts for any S/L are not available. 150.00
  28, 31, 32
  34
  7428 NOS, ECO factory made Shot Lengthener.  Most ECO mechanisms are set up to fill automobile tires and they produced 55 PSI.  If you wish to fill truck tires your unit needs to have a Shot Lengthener.  The addition of a Shot Lengthener will increase the PSI to approximately 100 PSI. This is a complete kit to add it to your unit.  Comes with instructions. 190.00
  34   7436

Washer, flat brass 1.00
  38, 61   7444   Three rear plate screws.  3/1.00
  39   7445   Washer.  Used on metal cams only. 1.00
  40   7446 Clip used to hold cam.  Part of mechanical Screw Kit 1.00
  43-44-45
       Kit
7452

 

We have a number of ECO factory made NOS sets.
 

Sold as a kit only.

30.00
  43-44-45   7453

Three new copper tubes.  These tubes are new and have been tested for leaks.  Exact copies of original tubes.

Sold as a kit only

55.00
  46   7466 NOS, ECO factory made, still in box, pre-tested Main Valve.

Check on availability before ordering 
jhsim@petrocollect.com

500.00
  48,49,55,65   7468 NOS, ECO factory made Main Valve Rebuilding Kit

Note:  The piston shown in the picture will need to be reused as they are no longer available.

30.00
  41   7470 Two Screws with washers, used to hold valve on.  Part of Mechanical screw kit.  Be sure to use washers 2/2.00
  56   7474 Metal Motor Roller, discontinued long ago, but we do have a few good ones.  Can only be used with a metal cam. 35.00
PLEASE NOTE:  If your unit is an older one with a metal cam and motor roller assembly, you cannot use a plastic cam or motor roller,  unless you replace both items.   You must use all plastic or all metal parts.  If you really want the metal ones, contact us, sometimes we have some NOS parts available.
  56, 42   7476        

NOS, ECO factory made Cam and motor roller kit.  It is recommended that this be replaced as a set. 50.00
  58   7480 NOS, ECO factory made Motor lever assembly. 15.00
  59   7482 NOS, ECO factory made Inflator lever assembly. 15.00
  60   7484 Drain Tube.  This was dropped years ago as unnecessary, but we do have some good used ones. 10.00
  61, 38   7444 Three rear plate screws.  3/1.00
  62   No Longer Available    
  63   Old style Main Valve, no parts are available for this valve marked with a "R"    
  50-51

7486

NOS, ECO factory made Plug and screen assembly, part of Main Valve. 25.00
  65

7488

Part of main valve kit above.    
    7600
ONLY $5.00 WITH ANY $150.00
ORDER
Model 90 Series Service Manual.
This is basically the original Service Manual that was in the box with the ECO when it was delivered.  BUT.....I have completely retyped it, eliminated much that was not necessary, inserted better pictures, and added "Jack's Tips."  These will help greatly if you are repairing your ECO.  If you don't want to repair your unit, remember, we do repair them.  Click here.
15.00
    7601 Reproduction copy of the Parts List manual covering the 93-94-95-97-98 ECOs.
Original
16 Pages, dated 1961 
25.00
    7602 Reproduction copy of the Parts List manual covering the 93-94-95-97-98 ECOs.
Laser copy
16 Pages, dated 1961 
13.00
         
  For those of you who want a working unit but do not wish to repair it yourself, we offer a complete repair service.  PLEASE CLICK HERE

See all the Model 90 Literature

         

To order, just click here

Back to List of Model 90 Parts

Home

Copyright 2014
Petroliana Collectibles
All Rights Reserved