Petroliana Collectibles

ECO MODEL 90 SERIES
AIR METERS

RESTORED ECOs FOR SALE

WALL MOUNT, ECO 97

jhsim@petrocollect.com

 


Turkey Run, Daytona, Florida


Chicagoland


Fall Hershey

These pictures show pedestal units, but everyone is available as a wall unit

Before we start, let me tell you something about us.  We started selling ECO parts and restoring ECOs in the late 1980.  We have sold more than 300 restored ECOs and have also become the largest seller of ECO parts in the world.  We (Cindy and I) believe it is because of the service and quality of product we provide. 

This is the Air Meter everyone remembers.  You set the pressure by turning the handle, put the chuck on the tire stem, the bell started ringing and the tire filled.  Thousands were sold, most are gone, but you can get a completely restored one right here.

This is the finest restored ECO Model 97 Wall Mount you will find on the web or Ebay. 

Everything has been powder coated and will stay a brilliant red much longer than paint, especially outdoors. 

New chrome including the reset handle, wheels restored, new face, stainless steel screws used throughout.

Mechanism has been rebuild, not just repaired.  Main valve rebuilt, new diaphragm, new check valve, and new strainer gasket.  Mechanism has been calibrated to within 1 lb.

Comes with original style, American made, 25' red hose with the long chuck, just like the one that was used on the 1947 model. 

Back cover with a new ID tag, stamped with a 1947 date. 

Working light unit installed ready to plug in.  Short air hose extends out the back ready for you to attach it to your air supply.  No need to open the unit to hook it up.

Take a look at the face and the back cover, I have even installed the original white fiber washers.  You won't see these on any other restored units.

Includes a copy of the revised Service Manual that I rewrote, just in case you ever have to re-calibrate the unit someday. 

There is only one thing you will have to supply besides the air and electricity.  Depending on how you are mounting it, you will have to purchase the correct mounting hardware (screws or bolts and nuts).

Just in case you have ever considered purchasing a used unit and restoring it, read this:

If you purchase a used ECO in a auction this is what you will have to do:

Pay around $750.00 to $850.00 for it, and it probably doesn't work, if it does work, for how long?
Take it apart, this could be tough if it is rusted
Sand all the metal parts or have them sandblasted
Replace all the parts that are unusable
Primer all the parts
Paint all the parts, or pay a body shop over $100.00 per hour to paint it for you
Buy a Service Manual to learn how to make the mechanism work
Repair the mechanism after buying the parts needed to make it work
Recalibrate the unit
Buy a new Chrome Kit and "AIR" glass
Buy a new reset handle if it is damaged or missing
Buy a new face if it is faded or damaged

Buy a new hose
Buy a new chuck
Buy a new light kit
Run the air line out of the unit
Most units do not come with a light, another thing to buy if you want one
New screws and misc. items, think of all the trips to the hardware store

HOW MUCH WILL YOU HAVE TIED UP IN THIS RESTORATION AND WHY GO THROUGH ALL THIS WHEN YOU CAN GET A COMPLETE, WORKING  WALL UNIT, POWDER COATED RED AND CALIBRATED TO WITHIN ONE POUND.  This is what my unit includes:

Complete wall mount
Front cover, powder coated red inside and out
Rear cover, powder coated red inside and out
Center housing, completely powder coated red
New Chrome Emblem Plate
New Chrome Bezel
New "AIR" Glass
New Chrome Scuff Plate
New Chrome Hook
White Fiber Washers

New Chrome Reset Handle
New Light Kit including the Bulb and with enough wire to attach it to your
electrical box
All new Stainless Steel screws hold everything together
New Air Line to the rear of the wall mount, just attach it to your air supply
New 25" American Made Red Hose, just like the one that was on the unit in 1947
Original style brass Long Chuck
All the air connectors so that you can remove and attach the hose at will
Service Manual that I have rewritten
Mechanism will be rebuilt and calibrated to within 1 lb.

 

STANDARD RED UNITS

$3199.00

All prices are for the lower 48, additional shipping required for Alaska, Hawaii and all International sales.

Sorry, we do not accept Paypal, we accept
United States Postal Money Orders only.


Jack Sim
3922 Madeline Dr.
St. Louis, MO  63114
Also, please send us an email letting us know of your order is on its way.
jhsim@petrocollect.com

For more information call:  314-427-3943

Normally we ship within 7-14 days, we will email you if there
are any delays.

For units powder coated in other colors besides red (see the picture above), please contact us.  These units also take longer to complete, and there will be an extra charge  of $75.00 per color.

Ready to mount


I am the only person using the original white fiber washers


Notice the original flat head stainless steel screws


Back of mechanism after restoration
Front of mechanism after restoration


New chrome reset handle and bleeder valve


Ready to have the hose attached
New ID Tag, electric and air line ready to attach to your supply

Hose with original style chuck and fitting, nothing extra to buy

 

One more thing, if you are shopping take a look at what others offer.  Look for these signs:
"I don't know if it works, I don't have anything to test it."  You can bet on it "not" working.
"The chrome has some pits but it can be rechromed."  No it can't. 
They cannot get the pits out of the lines on the chrome and on the edges of the bezel, I tried.  Also, have you checked on the price of rechroming?
"There is some rust at the bottom of the front cover."  Some rust?  This usually means it is rusted through and will require a new cover.  If it is necessary to use body filler to repair dents and scratches you will not be able to have the unit powder coated, you will have to have it painted.
"It has the original hose."  Hoses got replaced all the time, and if it is original it will be rotted and unusable.
"Completely restored."  Almost every unit I have seen on Ebay has bad looking wheels, why doesn't anyone restore the wheels?

One more thing to be very cautious of.  If you are looking at a unit on the web and the seller does not show you a picture of the mechanism, (a picture of the unit without the rear cover), he might be trying to hide something.  I have seen units purchased over the web where almost everything on the mechanism is missing (in other words the units was used as a parts unit) and this could cost you $100s of dollars replacing all the parts.

Back to List of Model 90 Parts

Home

Copyright 2014
Petroliana Collectibles
All Rights Reserved